Error code
Sub-Zero error code 10-3-11
Sub-Zero error code 10-3-11: condenser — thermistor — short circuit. What the code covers, what it usually points at on built-in refrigeration, and what to do about it.
- From $95 diagnostic, credited to the repair
- 59 cities and neighborhoods covered
- OEM parts available on order
- In writing the price, before anything is opened
What we can confirm
Code 10-3-11, from the manufacturer's own pages
A code is only meaningful together with the generation showing it — the same two digits mean different things across generations, and that is the commonest reason a code looked up online leads somewhere wrong. This one is recorded on Classic, Classic (current), Designer, Designer wine storage.
What it narrows down to
Condenser · thermistor
What you are probably seeing
Diagnostic
From $95, credited to the repair
What it looks like from the kitchen
The symptom this code usually arrives with
A code names the subsystem; the symptom is what sent you to look at the display in the first place. That page says what it usually turns out to be, cheapest cause first.
-
The most common call Refrigerator not cooling
A cabinet that runs warm, cools unevenly, or holds temperature overnight and not by day. Five ordinary causes, hundreds of dollars apart — and how to tell which one you are looking at.
- Warm on one side, fine on the other
- Holds overnight, drifts by day
- Compressor running far longer than it used to
On the same generation
What else belongs to the Classic
A code belongs to a generation rather than to one cabinet. These are the other codes yours can show, and the models that can show this one — a display often has more than one thing to say, and the model number decides what any of it costs to put right.
In more detail
About Sub-Zero error code 10-3-11
What 10-3-11 tells you
On the series that display it, 10-3-11 is logged against the condenser — thermistor — short circuit. That narrows the diagnosis to one subsystem, which is genuinely useful — it does not, on its own, say which part in that subsystem has moved out of range.
Codes in the 10s are sensor and thermistor territory: a temperature reading that has gone open, shorted or implausible. The sensor itself is often the cheap end of the repair — but the same code appears when the wiring to it has been disturbed.
The same digits mean different things across generations, so 10-3-11 on one series and 10-3-11 on another are not the same conversation — the number on the data plate is what separates them, and the model pages say what each generation means for a repair.
The code index covers how the codes are structured, what to photograph before you call, and the questions we are asked about them.
This article is based on:
- Official manufacturer documentation
- Internal repair procedures
- Technician repair history
- Company quality standards