--- title: "Undercounter & drawers" description: "Sub-Zero undercounter refrigerator drawers and beverage centers, built into islands and bars: what goes wrong with them and what it costs." url: "https://subzeromiami.support/appliances/undercounter/" date_modified: "2026-08-18" Appliance type: "Undercounter & drawers" --- # Sub-Zero undercounter & drawers ### Small units, tight access Refrigerator drawers and beverage centers are built into islands, bars and cabinetry runs where there is no space behind and often none above. The repair is usually straightforward; reaching it is not. How much of the surrounding cabinetry has to come apart is the biggest single factor in how long the appointment takes. ### What tends to go wrong - A drawer unit running warm, most often a condenser starved of airflow in a tight enclosure - Control and display problems, sometimes the panel rather than the board - Drawer seals and runners, which affect temperature as much as they affect the feel - Units under a bar sink, where a slow leak reaches the compartment before anybody sees it ### Clearance is not optional These units need the ventilation gap the manufacturer specifies at the grille. When a kitchen is refitted around one, that gap is often the first thing lost — and a unit that has run hot for a year usually asks for a condenser service before it asks for anything else. Drawers & beverage centers Undercounter repair Drawer units running warm Control and display problems Condenser access in tight cabinetry undercounter refrigerator Small units, tight access Refrigerator drawers and beverage centers are built into islands, bars and cabinetry runs where there is no space behind and often none above. The repair is usually straightforward; reaching it is not. How much of the surrounding cabinetry has to come apart is the biggest single factor in how long the appointment takes. What tends to go wrong A drawer unit running warm, most often a condenser starved of airflow in a tight enclosure Control and display problems, sometimes the panel rather than the board Drawer seals and runners, which affect temperature as much as they affect the feel Units under a bar sink, where a slow leak reaches the compartment before anybody sees it Clearance is not optional These units need the ventilation gap the manufacturer specifies at the grille. When a kitchen is refitted around one, that gap is often the first thing lost — and a unit that has run hot for a year usually asks for a condenser service before it asks for anything else. --- **[Read full article: Undercounter & drawers](https://subzeromiami.support/appliances/undercounter/)**